Cowboy boots refers to a special style of horse boots, historically worn by cowboys. They have Cuban heels, round to pointed ends, high axis, and, traditionally, no hitting. Cowboy boots are usually made of cowhide but sometimes made of "exotic" skins such as crocodiles, snakes, ostriches, lizards, eels, elephants, stingrays, deer, buffalo, and the like.
There are two basic styles of cowboy boots, western (or classic), and roper. The classic style is distinguished by the high boot shaft, will be at least mid-calf, with the heel of "cowboy" tilted, usually more than an inch high. A slightly lower heel, still tilted, "walking" is also common. The tip of the western boots was originally round or square-shaped. The design of the narrow pointed feet appeared in the early 1940s.
The newer design, the "roper" style, has a short boot shaft that stops over the ankle but before the center of the calf, with very low and densely packed "roper" heels, is shaped into a shoe sole, usually less than an inch high. Roper boots are usually made with rounded fingers, but, correlated with the stylistic changes in the streetwear, the force with square feet is visible. Roper styles are also made in lace design that is often more fitting around the ankle and tends to not be released, but the blow also creates safety issues for driving.
Video Cowboy boot
Histori
Horseback boots have been a part of riding life for centuries. Until the age of industry, boots are made individually with various styles, depending on the culture. The early cowboy boot design, along with other cowboy equipment, was also strongly influenced by the vaquero tradition imported from Spain to America, dating from the early 16th century. Military boots designed for cavalry riders also have an effect.
Later, the Industrial Revolution allowed some types of shoes to be mass produced. One of the mass-produced boot styles, Wellington boot, (shorter boot but horse riding) was very popular among cowboys in the US until the 1860s.
During the cattle-breeding period of 1866-1884, cowboys did not tend to damage a good pair of boots while working, but some had more decorative dress shoes for use in the city. The basic elemental elements permeated the shoe even worked, and made Wellington obsolete. Fashion magazines from 1850 and 1860 show cowboy boots with topstitching, geometric pieces or other natural elements and below heels.
American-style boots were taken by shoemakers in farm areas in Texas, Oklahoma, and Kansas. Two of the most famous early boot makers of that era were Charles Hyer of Hyer Brothers Boots in Olathe, Kansas, and H. J. "Daddy Joe" Justin from Justin Boots in the Spanish Fortress, Texas, and then Nocona, Texas. After Justin moved to Fort Worth where delivery was easier, Nocona's cowboy boots were made by Enid Justin Stelzer, the eldest daughter of H. J. Justin, who lives in Nocona with her husband, and the couple went on family business. After the couple was divorced, the Olsen-Stelzer brand was started by Stelzer.
Maps Cowboy boot
Design
When installing and, in particular, down, a smooth, unopened skin soles allow boot to easily insert and move the legs to a stirrup in the Western saddle. The original toes are rounded and somewhat narrowed at the toe to make it easier to insert. While a very pointy foot is a modern style that emerged in the 1940s, it did not provide practical benefits, and could be uncomfortable in boot work.
While in the saddle, high heels minimize the risk of the foot sliding forward through the stirrups, which can be life-threatening if it happens and the rider should be removed. There is often a great risk that a cowboy will fall from a horse, either because he often has to ride a young and unpredictable horse, but also because he has to do challenging ranching work in difficult terrain, which often means that he accidentally can become not destined by fast moving horses. If a rider falls from a horse but has boots trapped in his stirrups, there is a great risk that the horse can panic and run away, dragging the cowboy, causing severe injuries and possible death.
The high leather shaft of the boot helps hold the boot in place because there are no straps. The tall, comfortable loose stems and lack of lacing are all extra features that help keep the cowboy dragged down because his weight can pull his leg out of the shoe if it falls when the boots stay stuck in the stirrups. When mounted, the shaft also protects the lower leg and ankle from friction on the stirrup skin, as well as fending off brushes and spines, especially if also used with chapters or slits. While down, the shaft helps protect the legs and feet from rocks, brushes, thorns, and rattlesnakes. In wet weather or river crossings, high peaks help prevent the boot from filling with mud and water.
The modern style of boot rivals with low heels and short shafts emerged from traditional designs in response to the needs of modern rodeos, especially calves, where cowboys had to run to tie the calves and also to ride. The lower axis produces a cheaper boot, but also allows the boot to be more easily erased. The laceup design for roper shoes is popular because it prevents the boot from falling too easily and provides more ankle support when walking, although the lacer also has safety issues because it will not fall if the rider is hung on a stirrer, and, without the smooth top, lacings itself can make it easier for the boot to become trapped inside the stirrup in the first place.
The decor is very varied. The early shoes are cowhide put together with one top stitching line, but because boots are specially made, cowboys ask for decorative stitching, pieces at high peaks (early, often Texas stars), and different materials. The interaction between wild west performances and, later, western films influenced the styles sometimes employed by working cowboys. Modern cowboy boots are available in all colors and can be made from almost any animal whose skins can be made into leather, including exotic materials such as crocodiles and ostriches.
One of the accessories used with cowboy boots is the spurs, which occasionally attach to the heel of each boot for the purpose of marking a horse while riding a horse.
Pass
Many cowboy boot companies have been operating since the 19th century. Each manufacturer has developed his own to produce shoes, which are considered to be trade secrets and heavily guarded. Because of this, the fit between the companies is not always consistent. Each brand will fit slightly different from their competitors. When considering wearing a cowboy boot from a different manufacturer, it is advisable to seek help from knowledgeable traders who specialize in cowboy boots if one can not try it directly. Some users will swear by a manufacturer's match, while others will not feel the difference between brands.
For some individuals, the suitability may vary depending on the type of toes sought. In the right boot, regardless of the shape of the toe, the wearer must be able to wiggle his toes, not feel the pressure from the side, up, or front of the boot. If the individual legs have longer curves than usual, or if their legs are more V-shaped, narrow toes can cause problems. Finger round, or toes are fragmented, would be more suitable as ordinary shoes. Another factor is skin choice. A boot made of softer leather, such as calf leather, buffalo, or horsehide, will quickly stretch in the right spot and mold to the wearer's feet. That's why it's advisable to choose the right size because the boot will eventually "break" and a loose boot fit at the time of purchase will be careless.
However, some people are also unfamiliar with a slight heel slip on a new, non-laced cowboy boot, especially with a cowboy heel, and buy too small boot in an attempt to stop this slippage. But a bit of slippage is also normal at first. This slippage is caused by the stiffness of the new boot soles. When the only one becomes more flexible, the slippage will decrease.
Boot hooks are often required to wear a new pair of boots until they soften in the arch and enter. Jack boot is recommended for removal, although care should be taken not to damage boot heel when using the jack.
See also
- Cowboy hat
- Western Cloth
- Boot
- Acme Shoes
- Frye Company
- Double-H Shoes
- The Lucchese Boot Company
References
- Texas Monthly, January 1999: Boot Art
- Howard Zinn, Historical People of the United States , New York: Harper Collins, 2003.
Source of the article : Wikipedia
0 Comments